jameso wrote:So this does what a Supernova Plug does, just mounts anywhere? Looking for something like this and trying to decide what goes where, how etc. Ideally to take a wire from the fork leg and split it into the headlamp and quick-fit detachable usb link that can be tucked away in a front bag, or removed.
It sits between the dynamo hub and whatever USB thing you want power to, be it the device directly or a battery that you then use later to charge the device.
Personally I will have mine in a top tube bag.
There's a few different setups that can be done.
1. For example Mike Halls TD set up was 2 wires twisted together into the hub. Both wires coming up the fork leg one into the Revo and one into the Plug2. You can't use both at the same time as there isn't enough power but you unplug devices as appropriate.
2. The way in which I believe flatfishy, myself and mtbmark are working this (will do mine this way when the device arrives) is to have the wire for the Revo attached to the hub, up the fork leg. When using the light the wire (male plug) is plugged into the Revo. mtbmark was able to source the female end of the plug, so it's a simple mod to attach this to the wire that comes out the sinewave. You then just plug the wire into that when you want to use it. This means you only have one wire coming up the fork leg and you have an easy way to switch what is plugged in.
)
