Wtd - dropper lever with a 31.8 clamp (have post already)

mskinner · Post by **mskinner** » Sat Oct 14, 2023 8:08 pm

Hi all

My adventure into a dropper post needs the above, have the post but the clamp is a little small.

Have seen the wolftooth version but it’s a little out of my price range new

Any other thoughts on how to work it out welcome

Cheers matt

redefined_cycles · Post by **redefined_cycles** » Sat Oct 14, 2023 8:40 pm

Hi Matt. I upgraded my Brand X lever after it wore out (the tiny allen bolt). I think it was a Bontrager I got but can happily advise it was money very well spent. Felt like upgrading from a Barracuda/Apollo to a GT if you catch the drift.

Defo see if you can find one of those whoch was about half the price of te Wolftooth version. I think 100% and a few other companies also do upgraded levers. Not sure if it does, but hope it helps

.

riderdown · Post by **riderdown** » Sat Oct 14, 2023 10:52 pm

https://www.chainreactioncycles.com/p/b ... -and-105mm

See it as an expensive lever with a free spare dropper post

substandard · Post by **substandard** » Sun Oct 15, 2023 7:34 pm

Which end of your dropper is the cable gripped at?

The lever or the post end?

I’ve got a lever from a post end gripped version on the workbench I’d part with.

mskinner · Post by **mskinner** » Sun Oct 15, 2023 8:26 pm

Hi, this one is gripped at the lever end, thanks for the offer

substandard · Post by **substandard** » Sun Oct 15, 2023 9:31 pm

Used these in the past for lever clamp posts at a reasonable price

https://www.highonbikes.com/products/rs ... gLDyPD_BwE

Wtd - dropper lever with a 31.8 clamp (have post already)

Wtd - dropper lever with a 31.8 clamp (have post already)

Re: Wtd - dropper lever with a 31.8 clamp

Re: Wtd - dropper lever with a 31.8 clamp

Re: Wtd - dropper lever with a 31.8 clamp (have post already)

Re: Wtd - dropper lever with a 31.8 clamp (have post already)

Re: Wtd - dropper lever with a 31.8 clamp (have post already)