Rabbit Hole Tubless Torment...

[Escape Goat]

Who on here has successfully tubelessed a rabbit hole?

I was trying to make knards tubeless for the second time of their life, but on rabbit holes...

Then this happened https://www.flickr.com/gp/168440403@N04/k90eW2

Could it be the tyre just being dead....I would buy tyres if i knew it would work...

[HopeValleyPaul]

It does work but it’s a ball ache.
I’ve had chronicles on rabbit holes for a few years now.
Had to go down the split tube route, it’s been bomb proof since.

[firestarter]

I did it with gorilla repair tape , two wraps and it went straight up , worked with surly Edna and a knard too

[Escape Goat]

I've looked at the chronicles, but can't find a UK distributor that have them available. Just seams to be online.

[fatbikephil]

Use split tube, its easy and reliable and the best way to tubeless RH's. Chronicles were discontinued last year sadly. Bonty XR2's/ Chupacabras are ace

[JohnClimber]

I had to swap out my rabbit hole rims for Hugo rims to go tubeless with Knards.
It's not the tyres, it's the rims

[RobLyon]

I've had/got tubeless knards on rabbit holes with the split tube method. I used schwalbe tubes from crc. It can be a little fiddly changing tyres in the future but is do-able.

Schwalbe MTB Tube

24", 1.5 - 2.5", Presta,

[Bish]

Same as above really I used the split tube method, worked with knards, dirt wizards and chronicles.

[Escape Goat]

Thanks for the split tube trick!! I may give it a go, or order an xr2 and see if it seals. Managed to pop them on the rim, but as you can see from the video, it's leaky leaky.