Quality parts sale photos added of wheels

[BigdummySteve]

Funn 70mm carbon stem sprayed olive green as it was too bling cost £ 130
£20

XT trekking brakes ( have longer 3 finger levers), pair of
£60

SRAM S1000 x-Sync crankset 32 tooth ring £50

Thompson elite layback seatpost 27.2mm £30

Reynolds 29” carbon disk wheelset 15x100 front, 12x142 rear good condition red hubs. 24 spoke with internal rim of about 20mm so one for the cross country boys or a posh road set? £400

I think that’s it for now, there may be more, oh yes a rohloff chain tensioner?

[ton]

interested in the Kris holm/rohloff wheelset. if you decide to sell/

[ripio]

PM sent re Cycle2charge and Supernova light

[BigdummySteve]

Light+charger sold

[BigdummySteve]

Front 29+ wheel sold, rohloff still available

[jamesatthelodge]

How much is the rolhoff please

[BigdummySteve]

Rohloff 29+ wheel reduced to £600, hub is external shift box, 6 bolt disk, 135mm QR in black

[AlasdairMc]

I have a Rohloff myself and if I had another suitable bike I’d probably be interested.

The 36h build will still allow you to use the hub on a 32h rim in case that’s a consideration for any potential buyer.

[BigdummySteve]

Yeah I love the rohloff, I’ve about 7K on it and it’s just been faultless, ultimately the ECR it was fitted to has been replaced by a Fargo with multiple wheel sets. Unfortunately I can’t afford 3 rohloff hubs... I’ll miss it.

[polarcherry]

Any chance of some photos of the carbon wheels

[BigdummySteve]

Any chance of some photos of the carbon wheels

Some here

https://www.flickr.com/gp/147258524@N05/K94W7W

I’ll take some proper snaps if you need them

[flash]

What's the rim? Can you post pics please???

[BigdummySteve]

What's the rim? Can you post pics please???

The rim on the rohloff is a kris holm, 47mm
https://flic.kr/p/Wg6Zwy

[tommid]

Can I get a picot the post? What the condition like?

[Squirtymcfilthy]

Hi. Is there any rise on the stem please.cheers

[AlasdairMc]

A few questions on the Rohloff (I now have a suitable bike):

What is the torquing mechanism for it - Monkeybone, OEM axle plate or something else?
How many miles since new?
Serviced properly per Rohloff instructions?
What sprocket currently fitted?
Will you sell without rim?

[BigdummySteve]

A few questions on the Rohloff (I now have a suitable bike):

What is the torquing mechanism for it - Monkeybone, OEM axle plate or something else?
How many miles since new?
Serviced properly per Rohloff instructions?
What sprocket currently fitted?
Will you sell without rim?

Oem2 axel plate, you can or course change this, 6-7K of which 6 was road. Oil changed including flushing with genuine rohloff oil kit about 4 times during its life time. It’s currently fitted with a 16 tooth sprocket which could do with turning.
I would sell without rim but the price would be similar

[AlasdairMc]

Thanks. It does seem exactly what I’d need but I have a few things I need to sort on my current build before deciding - basically the Rohloff is the last thing that I’d get only if other options don’t work.

I should know within a week as to whether I’ll go for it, but if someone else offers to buy it in the meantime then please don’t hold it on my account.

[BigdummySteve]

No worries, I’m at the winter event if you decide by that time

[Squirtymcfilthy]

hi, would still like to know if any rise on Funn stem?

[BigdummySteve]

Hi sorry, a little about 10deg. I can check when I get home

[Squirtymcfilthy]

thanks.

[BigdummySteve]

If anyone is interested in anything I’m at the winter event, due to reduced faff I’ll knock 10% off anything I bring up

[nedrapier]

Hi Steve I might be interested in the 20/20 bars. I really like the pair I've got already, but a bit cautious about 2nd hand carbon. Have they had a lot of use? Any scuffs and scratches?

[BigdummySteve]

No damage/ scuffs or nicks, they are great bars, sadly seem to be discontinued now. I was tempted to stick they in the cupboard just in case I get another flat bar bike.