The post man's been ...

[Ian]

Yep, that's the one, only bought from Clee Cycles. Really nicely made. What the description doesn't tell you (or I didn't bother reading) is it comes with 31.8 and 26.0 diameter clamps and two tubes to fit either end so you get more mounting options. Trimmed one of the tubes to length last night, and it tips the scales at only 18g.

[voodoo_simon]

^^^
I used that in the R150, great piece of kit

[ootini]

My new bottle cages and bottles have arrived for my experiment with lead weighting... Now I just need some lead shot!

I'm thinking that I'm probably going to need to velcro the bottles in place though as whilst I bought the sturdiest cages I could find, they still don't seem that sturdy.

You anywhere near north Wales ? Got about 4kg sat in the garage you can have.

[Dave Barter]

Great shout Ian that was exactly what I was looking for and will replace my bodged stem version of the same that weighs a ton

[ianfitz]

Yep, that's the one, only bought from Clee Cycles. Really nicely made. What the description doesn't tell you (or I didn't bother reading) is it comes with 31.8 and 26.0 diameter clamps and two tubes to fit either end so you get more mounting options. Trimmed one of the tubes to length last night, and it tips the scales at only 18g.

Just be careful not to over tighten the clamp on the extra tube. It's very thin and will crush (then end up getting loose and rattle)

I had one prior to the loops I've got now and it did end up rattling loose due to me overtightening.

[welshwhit]

A rather nice stove from Stuart, works well for my mytimug or my 450 ml mug, pretty chuffed

Untitled by drew Whitley, on Flickr

Untitled by drew Whitley, on Flickr

All fits in the 450 ml mug nicely with room for lighter and a couple of coffees!

[burty]

new set of xt brakes for the krampus, not bad as I only nipped in swinnertons up at Cannock for a coffee

xt.jpg (77.78 KiB) Viewed 4288 times

[slarge]

A pair of Kinesis cross light wheels from Merlin. Can finish the cx build now.

[Charliecres]

Bargain Silwing from Needlesports. Nice bit of kit but need a slightly longer pole now.

[Richard G]

I have one myself, and yeah, you basically need a tree or a truly massive pole to make it work.

[GregMay]

Hello... ok, that's a good PSA thanks.

[Pat]

A lovely set of Jones loops in 710mm flavour, with a 100mm zero rise thomson....bought used, but immaculate, and wrapped by me in Brooks leather tape within minutes of taking them out of the box!



I've been riding the titec j-bar for a year or so, with a view to getting these...

[Richard G]

You anywhere near north Wales ? Got about 4kg sat in the garage you can have.

I only just noticed this. I'm not, but thanks for the offer.

[jameso]

and wrapped by me in Brooks leather tape within minutes of taking them out of the box!

Very neatly done too .. the brake lever cover bits also

[Ian]

New camera arrived yesterday

Controls for aperture, shutter, exposure compensation, and lots more, plus shoots 4K video at 25fps.



It even has a viewfinder. Takes me back 20 years that does (SLR's notwithstanding).

[voodoo_simon]

New camera arrived yesterday

Controls for aperture, shutter, exposure compensation, and lots more, plus shoots 4K video at 25fps.

Think you got a dud there Ian, the logo is on backwards

[Ian]

Think you got a dud there Ian, the logo is on backwards

If you view it from the rear of your monitor, you'll find the logo is the correct way around

[Pat]

and wrapped by me in Brooks leather tape within minutes of taking them out of the box!

Very neatly done too .. the brake lever cover bits also

Thanks fella!
First time with no re-taping too

[voodoo_simon]

Think you got a dud there Ian, the logo is on backwards

If you view it from the rear of your monitor, you'll find the logo is the correct way around

[flips phone around]

n'ah, it's says Sony

[Zippy]

New camera arrived yesterday

Controls for aperture, shutter, exposure compensation, and lots more, plus shoots 4K video at 25fps.



It even has a viewfinder. Takes me back 20 years that does (SLR's notwithstanding).

Coool,

Shame it doesn't seem to do colour!

[Ian]

Retro, innit

[johnnystorm]

Bundle of DT spokes and a Park Wheel truing stand. Going to swap everything out on my rear hope hoop that seems to lose a spoke every other time I go out.

[Scattamah]

Just back in the gate from Oz...found my repaired Pole-A-Bear pole waiting for me. A big thanks to Mr S8tan for sorting that out. I'm liking the b&w BB Bivvy Gear sticker. Need to find a space on Lois that isn't covered in luggage for that one.

Greetz

S.

[HUX]

XT mech from Ian's clearout. Perfect timing by Mr Postie as i'd just taken the old battered 1 off. Cheers Ian, perfect.

[JohnClimber]

Not the postman but a trip to Keep Pedalling came up trumps with 2 new Stans 52mm Hugo 29er+ rims built up as tubless on my bike packing and long distance bike.



Cheers Shona, Rich and SteveMorg off here