Feather Cycles - Steel/Stainless Frame and Fork

[Richpips]

I bought this a while back. The previous owner had not looked after the paintwork, so it needed redoing. I didn't have a spare £800 for a Fat Creations paintjob, but it was suggested to me that a local powder coater would do a decent enough job. It took ages for the guy to get the job done and when I went to pick it up what wasn't wrapped in bubblewrap looked great. When I got home I unwrapped it and saw a few tiny bubbles and imperfections which made me pause building it up again. Annoyingly the bubbles are mostly on the stainless chainstay that he wasn't supposed to coat.
Meanwhile I spied another hand made steel frame and fork, my Rothair, and bought that.

I'm away at the moment so can't give you exact measurement but it fits me at 5'10". The frame number is 55
27.2 seatpost, 1" non threaded steerer, QR wheels, long drop rim brakes mudguard mounts

The pics show the candy red, and the bike as it was built up before. The previous owner had a bad back hence the stack of spacers

Ricky doesn't do F+F alone anymore, but as a guide, complete bikes are between 10 and 15K

600 posted to your door or I'll deliver within an hour of SK22

https://photos.app.goo.gl/r2xd9tikFRpjobYE9

[Tomwoodbury]

What’s the tyre clearance Rich?

Ta

[Richpips]

Hi Tom, it came with 28mm tyres.

[Tomwoodbury]

Cheers, proper road bike then. Not for me but GLWS

[Richpips]

Thanks Tom.

Some figures. Deffo clearance for 28c with guards
C2C Top tube 530mm, Seattube 545mm

[Tomwoodbury]

You’d probably have a lot of interest on the LFGSS classifieds for this Rich FYI

[Richpips]

Reduced to £500

Else it's off to ebay