Wanted forks that take 29x3.0, rigid or sus

[riderdown]

Building up the olsen as a winter bogtrotter

Suspension around 120mm, rigid suspension corrected to similar

Lock out if suspension

Boost hub

What have you got?

[Amey]

Where are you based? if London I have a stache frameset haha

[faustus]

Flagrant plug of these forks I can't sell: https://bearbonesbikepacking.co.uk/phpB ... hp?t=24946

They took a 2.6 with plenty of room, but are only 490mm a/c so might not be quite what you're after...Currently £120 but probably open to an offer!

[riderdown]

.They took a 2.6 with plenty of room, but are only 490mm a/c so might not be quite what you're after...Currently £120 but probably open to an offer!

With my heft I don't want to risk the small hole/ damage in the carbon unfortunately

[faustus]

Fair enough, though it's just a surface scrape and I'm no lightweight... understand why the damage is off-putting though

[slarge]

Got some Rockshox Rekons - off a new bike. Boost bolt through, but a short steerer (i think 170mm from memory)

[riderdown]

Still looking, reasonable steerer length needed

[substandard]

Is boost a must have?

Might not be what you’re after


Got an ally version of the exotic fork in uber-duber boost (due out in 2028 hehe) also known as 135x15mm FDS.

Have a hope hub to suit this as well

[riderdown]

Is boost a must have?

Yes unfortunately

[richieblade]

I have set of Wren.inverted forks with 110mm travel. Currently on a pinion.bike (see my advert) but may split. No middle arch so a 3 inch tyre should easily fit