Wanted: Ti Jones bar
Moderators: Bearbonesnorm, Taylor, Chew
Wanted: Ti Jones bar
Missed a set on eBay the other week. Either width would be fine.
Re: Wanted: Ti Jones bar
Loops?
Could save yourself a fortune and get the Al versions.. I have both and can't tell a jot of difference fwiw. Bought the Ti loops just to finish off the bike. The old Ti H-bar non-loops feel quite different though, much softer.
Could save yourself a fortune and get the Al versions.. I have both and can't tell a jot of difference fwiw. Bought the Ti loops just to finish off the bike. The old Ti H-bar non-loops feel quite different though, much softer.
Re: Wanted: Ti Jones bar
Either, ideally both! Ti is 99.5% for looks 
I'll probably end up getting a set of Al loops for one of the bikes I'm building but figured I'd ask as a set of the original, shimmed loops and a skinny 25.4mm stem would look nicer. Similarly I'd be curious to try the original cut version one of two road+/650b mid/low trail touring bike type things. My quest to turn "nice" bicycles into bling hybrids continues...
I'll probably end up getting a set of Al loops for one of the bikes I'm building but figured I'd ask as a set of the original, shimmed loops and a skinny 25.4mm stem would look nicer. Similarly I'd be curious to try the original cut version one of two road+/650b mid/low trail touring bike type things. My quest to turn "nice" bicycles into bling hybrids continues...
Re: Wanted: Ti Jones bar
Same here :)
Did he make a shimmed loop bar? Didn't see those.
I had the original Ti Hbars on a 650B gravel bike for a while, was a good combo. Some Al cut loops also. They felt a bit narrow overall though as the grip section ends are shorter.
I like the old Hbar design as a road/utility/ hybrid bar as you can grab or hook the ends like bar ends, I miss that in the loops.
Did he make a shimmed loop bar? Didn't see those.
I had the original Ti Hbars on a 650B gravel bike for a while, was a good combo. Some Al cut loops also. They felt a bit narrow overall though as the grip section ends are shorter.
I like the old Hbar design as a road/utility/ hybrid bar as you can grab or hook the ends like bar ends, I miss that in the loops.
Re: Wanted: Ti Jones bar
Yep! I missed these: https://www.ebay.co.uk/itm/276396323616Did he make a shimmed loop bar? Didn't see those.
drj0n had a few sets too https://www.flickr.com/photos/drj0n/14700635578/
Re: Wanted: Ti Jones bar
Still looking. Missed two in the last week (admittedly one came with rest of a bike attached... )
)