Direct power from dynamo to garmin
Moderators: Bearbonesnorm, Taylor, Chew
-
- Posts: 100
- Joined: Sun Mar 06, 2016 8:05 pm
Direct power from dynamo to garmin
I was at the london cycle on thursday. A bit disappointing as usual. I did speak to a guy about garmins on the blacks stand i think?
He said if i took batteties out of my touch 35 and set system to usb garmin then i could run the garmin all day off dynamo hub / though sinewave.
Apart from exposing socket. To elements it seems a good idea in dry weather.
Anyone ever done it on any gps.
Any draw backs??
He said if i took batteties out of my touch 35 and set system to usb garmin then i could run the garmin all day off dynamo hub / though sinewave.
Apart from exposing socket. To elements it seems a good idea in dry weather.
Anyone ever done it on any gps.
Any draw backs??
Re: Direct power from dynamo to garmin
What happens when you stop moving? Or are you planning to use a cache battery between the dynamo and the GPS to keep it switched on?
-
- Posts: 100
- Joined: Sun Mar 06, 2016 8:05 pm
Re: Direct power from dynamo to garmin
Good point didnt think of that one. With a cache battery inthe loop. It shud work. .
-
- Posts: 8144
- Joined: Mon Mar 18, 2013 9:56 am
Re: Direct power from dynamo to garmin
Then you need to find a cache battery that will charge and discharge at the same time.
I managed to find one but it switches the discharge circuit off when I slow down/stop, which sort of defeats the purpose
I managed to find one but it switches the discharge circuit off when I slow down/stop, which sort of defeats the purpose

Re: Direct power from dynamo to garmin
The B+M USB Werk AC to USB converter has a small battery built in so it will keep a garmin off that annoying 'power lost' message during brief stops or slow climbs. ~£50. Mine's been great. I could use a cache cell with it also but haven't needed to so far.
-
- Posts: 100
- Joined: Sun Mar 06, 2016 8:05 pm
Re: Direct power from dynamo to garmin
jameso wrote:The B+M USB Werk AC to USB converter has a small battery built in so it will keep a garmin off that annoying 'power lost' message during brief stops or slow climbs. ~£50. Mine's been great. I could use a cache cell with it also but haven't needed to so far.
So you ride with your garmin diectly powered ?
-
- Posts: 2154
- Joined: Wed Mar 21, 2012 9:39 am
- Location: Southern Cataluña
- Contact:
Re: Direct power from dynamo to garmin
I like to think of the setup as a flow of water. To keep most Garmins sweet, you need an uniterrupted flow of power, direct power from a dynamo will only work whilst you are moving, in most cases over about 8mph. A power bank is a reservoir that the dynamo keeps topped up, allowing juice to flow constantly to the gps. The tricky bit is finding a power bank that allows pass through charging and doesnt stop sending out power when the dynamo is putting power in. Ive found 2 that work, 1 is called a juice cube and only costs a fiver from Maplin, the problem is it seems to have been discontinued. The second is a Portapow 10200mAh capacity which should last forever. These are available direct from them or via Amazon for £15-20.
Hope this helps.
Hope this helps.
-
- Posts: 100
- Joined: Sun Mar 06, 2016 8:05 pm
Re: Direct power from dynamo to garmin
Yes it does thankyou. Is it common practice to run a garmin this way ?pistonbroke wrote:I like to think of the setup as a flow of water. To keep most Garmins sweet, you need an uniterrupted flow of power, direct power from a dynamo will only work whilst you are moving, in most cases over about 8mph. A power bank is a reservoir that the dynamo keeps topped up, allowing juice to flow constantly to the gps. The tricky bit is finding a power bank that allows pass through charging and doesnt stop sending out power when the dynamo is putting power in. Ive found 2 that work, 1 is called a juice cube and only costs a fiver from Maplin, the problem is it seems to have been discontinued. The second is a Portapow 10200mAh capacity which should last forever. These are available direct from them or via Amazon for £15-20.
Hope this helps.
Re: Direct power from dynamo to garmin
Hub>USB Werk>Garmin 800. Standard way of keeping a similar GPS powered. Sinwave etc will do similar, just the battery just helps smooth out the power into the Garmin. I leave it plugged in on long rides, when the battery is full is draws now more current anyway and stays full, unplug it if I need to charge the phone or if weather's poor.So you ride with your garmin diectly powered ?
Re: Direct power from dynamo to garmin
I use a powermonkey explorer 2 in-line between my plug 3 and garmin/mobile.
This cache battery also allows an uninterrupted flow to the garmin (old edge 800) irrespective of losing dynamo power when I stop/slow down. This way, I can ensure I can charge phone, gps camera etc while moving and still be topping up the cache when nothing else is charging.
It's had a lot of use both on the bike for a couple of years and when backpacking and has been very reliable. Only problem is that it's robust aluminium construction means it's relatively weighty for a 6000mAh cache.
This cache battery also allows an uninterrupted flow to the garmin (old edge 800) irrespective of losing dynamo power when I stop/slow down. This way, I can ensure I can charge phone, gps camera etc while moving and still be topping up the cache when nothing else is charging.
It's had a lot of use both on the bike for a couple of years and when backpacking and has been very reliable. Only problem is that it's robust aluminium construction means it's relatively weighty for a 6000mAh cache.
-
- Posts: 100
- Joined: Sun Mar 06, 2016 8:05 pm
Re: Direct power from dynamo to garmin
Ive just ordered a. Portapow cache battery. Hub / sine wave/ cache / garmin touch 35
On wet days good old rechargeable batteries.
From what iv read it should work
On wet days good old rechargeable batteries.
From what iv read it should work