Page 1 of 2
FS: Ti lids for 450ml mugs
Posted: Tue May 26, 2015 6:05 pm
by Bearbonesnorm
450ml Ti mugs don't usually come with lids but now you can throw away that piece of foil and adorn your mug with a proper Ti lid, thus transforming it into a real mini pot
I've only 4 of these at the moment but if there's a demand I'll source some more,
A tenner delivered.
Mug and cuben stuff sack not included.
Re: FS: Ti lids for 450ml mugs
Posted: Tue May 26, 2015 7:27 pm
by Clink
Yes please! How do I pay?
Re: FS: Ti lids for 450ml mugs
Posted: Tue May 26, 2015 7:30 pm
by wildgecko
One for me please!
Re: FS: Ti lids for 450ml mugs
Posted: Tue May 26, 2015 8:17 pm
by Bearbonesnorm
Re: FS: Ti lids for 450ml mugs
Posted: Tue May 26, 2015 8:24 pm
by Clink
Money sent
Re: FS: Ti lids for 450ml mugs
Posted: Tue May 26, 2015 8:43 pm
by Zippy
I'd be interested if they were about £5...
For £10 I can cut some carbon fibre out etc. etc.
Re: FS: Ti lids for 450ml mugs
Posted: Tue May 26, 2015 8:44 pm
by Ian
What do they weigh?
Re: FS: Ti lids for 450ml mugs
Posted: Tue May 26, 2015 9:05 pm
by Bearbonesnorm
For £10 I can cut some carbon fibre out etc. etc.
Nowt stopping you, although you could use a piece of foil for even less
What do they weigh?
14g Ian
One for Si, one for Clink, one for Drew ... so one left.
Re: FS: Ti lids for 450ml mugs
Posted: Tue May 26, 2015 9:14 pm
by bookwyse
Can we take one as well please?
Re: FS: Ti lids for 450ml mugs
Posted: Tue May 26, 2015 9:16 pm
by Bearbonesnorm
Can we take one as well please?
You can Jeff.
That's it, all spoken for.
Re: FS: Ti lids for 450ml mugs
Posted: Tue May 26, 2015 9:39 pm
by bookwyse
Cheers, payment has been sent.
Re: FS: Ti lids for 450ml mugs
Posted: Tue May 26, 2015 10:07 pm
by Dan_K
I can hear my Bisto lid slowly sobbing as I contemplate a new purchase...
Re: FS: Ti lids for 450ml mugs
Posted: Tue May 26, 2015 10:30 pm
by Ian
s8tannorm wrote:For £10 I can cut some carbon fibre out etc. etc.
Nowt stopping you, although you could use a piece of foil for even less
What do they weigh?
14g Ian
Sorry, too heavy for me...
Re: FS: Ti lids for 450ml mugs
Posted: Tue May 26, 2015 11:16 pm
by benp1
I'll take one if you get any more please!
Re: FS: Ti lids for 450ml mugs
Posted: Tue May 26, 2015 11:35 pm
by Artie Fufkin
I'll have one if you get some more, aswell!
Cheers
Re: FS: Ti lids for 450ml mugs
Posted: Wed May 27, 2015 7:32 am
by Bearbonesnorm
I shall source some more. I'll post up when they're here ... I'll also drill some holes in one for Ian
Re: FS: Ti lids for 450ml mugs
Posted: Wed May 27, 2015 7:20 pm
by wildgecko
Sent via paypal
Re: FS: Ti lids for 450ml mugs
Posted: Thu May 28, 2015 3:13 pm
by Clink
Arrived! Thanks
Re: FS: Ti lids for 450ml mugs
Posted: Thu May 28, 2015 4:40 pm
by welshwhit
Mine has arrived too, thanks Stuart
Drew
Re: FS: Ti lids for 450ml mugs
Posted: Fri May 29, 2015 9:06 am
by Ian
s8tannorm wrote:I shall source some more. I'll post up when they're here ... I'll also drill some holes in one for Ian
Are they cheaper with holes in?
Re: FS: Ti lids for 450ml mugs
Posted: Fri May 29, 2015 9:19 am
by Bearbonesnorm
Are they cheaper with holes in?
Sadly not, due to the labour involved they'd likely be double the price ... remember, less is more
Re: FS: Ti lids for 450ml mugs
Posted: Sun May 31, 2015 7:58 am
by wingnut
Re: FS: Ti lids for 450ml mugs
Posted: Sun May 31, 2015 9:22 am
by Bearbonesnorm
Bloody hell that's cheap. I couldn't get them for that even buying in 'bulk'
Re: FS: Ti lids for 450ml mugs
Posted: Sun May 31, 2015 1:54 pm
by wingnut
You would need to check the diameter make sure it fits 8.6 cm .
Re: FS: Ti lids for 450ml mugs
Posted: Mon Jun 01, 2015 10:39 am
by benp1
Presumably they fit as its the same brand as the one in Stuart's photo (although I only just found that out as I didn't spot that before
They are ridiculously cheap
I'll buy one from there and check