Jumping off the Swift (with Jones bars) back onto the trusty 456 with straightish bars is a bit of a shock (feels like they have negative sweep)

Any bars out there with a generous amount of sweep?
Im also going to need 40mm of rise to replace what i have now

http://www.on-one.co.uk/i/q/HBOOOG/on-one-og-handlebar
38mm rise, and lots of sweep, and they're very comfy to boot

The OG bars from On-one might do you, I measure the rise @ 38mm and plenty of sweep ... much cheapness too

Edit: as you can see I was beaten to it, these keen youths, I can't keep up

Triton have some Fairdale bars on sale with some serious back sweep.

johnnystorm wrote:Triton have some Fairdale bars on sale with some serious back sweep.

http://www.tritoncycles.co.uk/component ... ebar-p1178
Might it be these your referring to?

That's the ones. Might be a tad narrow but sweeptastic!

I have a set of Mary bars that I would like to move on Chew?

I think salsa do some with 17degrees

Hi CHew,
I've got some spare fleegle pro 660 wide and my prototype OG's which are 710 both have 31.8 clamp size. You're welcome to borrow to try.

FLV wrote:I think salsa do some with 17degrees

If you mean the 17degree bend2 although it does have some rise it's so little that it may as well be flat.

composite wrote:

FLV wrote:I think salsa do some with 17degrees

If you mean the 17degree bend2 although it does have some rise it's so little that it may as well be flat.

And a 23 degree option. It is enough rise for my sweetroll style bag to clear the brakes which it won't on true flat bars.