edited, because I was asked to

How about Thorn Cycles?

Might be worth an email to Rohloff John-

http://www.rohloff.de/no_cache/en/testa ... 5D=adapter

Or maybe SJS-

http://www.sjscycles.co.uk/page/find/?n ... ge=1#page=

edited, because I was asked to

JohnClimber wrote:
Long story, tried that option and failed.

Need a non Rohloff option

You can tell me about it next time we're out.

Could be difficult to make one without a drawing or another one to copy off..

SJS Cycles?

I dont own a machine, but I do drive CAD.

I could likely model something up but would need a better image and a some guess work on some dimensions

edited, because I was asked to

Thorn have a lot of knowledge on Rohloff stuff for sure. They would be worth a call.

I quite fancy a dabble with belt drive, but as a SS. hmmm.

edited, because I was asked to

Pauls components used to make carriers and gates sprokets.

Screw on carrier and bolt on sprocket it seems.

Let me know if you need a CAD model doing for one. I'm sure between Michael, you and me we could figure out the dims.

edited, because I was asked to