
Yay, nay or a load of rubbish ... everyone knows bars are chosen on the basis of what CRC have on offer!
Moderators: Bearbonesnorm, Taylor, Chew
Last time I checked, you can only have bar ends with flat bars. Riser bars should not have bar ends.ctznsmith wrote: An example would be bar ends are 'uncool' however I ride bar ends because I don't care and want multiple hand positions..
Im with ctzsmith on this one. I like to move my hands around so my preference is for some Jones Loopsctznsmith wrote:It should .... I tend to put function over form for the most part even if that isn't in keeping with the latest trend.
Had a very similar experience at a DH race some years ago. Bars were starting to get pretty wide (760mm>) on the elite DH circuit. A young lad turned up at a Welsh championship event sporting something around 800mm. I questioned him and his motives and he told me they were fine because Nathan Rennie used them ... he couldn't understand that Mr Rennie is 6'3" not 5'3"One of the kids I coach turned up with a set of bars that were easily 760mm wide last weekend. He's only 11 and was doing a fairly good impression of Christ on the cross, his arms were so stretched out. He swore blind they were giving him more control (they weren't) and, anyway, they looked awsome.
Gave me such a good laugh that line.He's only 11 and was doing a fairly good impression of Christ on the cross
What does this mean of my new setup?
That you have odd shaped arms? : )What does this mean of my new setup?