Page 1 of 1
Wtd: 1x crankset
Posted: Thu Jun 12, 2025 9:53 pm
by rivers
After a 1x gravel crankset, ideally 165mm cranks. And must be able to take a 34 or max 36 tooth chainring.
Anyone?
Re: Wtd: 1x crankset
Posted: Thu Jun 12, 2025 10:17 pm
by Chris
Not quite to spec but I've got a 12 speed xt chainset running a 32t ring. 175 I think
Pm me if any use
Re: Wtd: 1x crankset
Posted: Thu Jun 12, 2025 10:46 pm
by slarge
If it helps a 1x chainset is a 2x or 3x chainset with rings removed.....
Re: Wtd: 1x crankset
Posted: Sun Jun 15, 2025 7:34 pm
by rivers
Chris wrote: ↑Thu Jun 12, 2025 10:17 pm
Not quite to spec but I've got a 12 speed xt chainset running a 32t ring. 175 I think
Pm me if any use
[/quot
Thanks, but 175mm is going to be too long for me. I'm struggling to find anything new or used in 165 in a 1x, so may need to go to 170
Re: Wtd: 1x crankset
Posted: Sun Jun 15, 2025 10:30 pm
by Chris
rivers wrote: ↑Sun Jun 15, 2025 7:34 pm
Chris wrote: ↑Thu Jun 12, 2025 10:17 pm
Not quite to spec but I've got a 12 speed xt chainset running a 32t ring. 175 I think
Pm me if any use
[/quot
Thanks, but 175mm is going to be too long for me. I'm struggling to find anything new or used in 165 in a 1x, so may need to go to 170
That's what I ended up doing! Even that 5mm makes a big difference
Re: Wtd: 1x crankset
Posted: Mon Jun 16, 2025 9:34 am
by Kuman
Hi I think I still have deore 170mm with Blackspire 36t chainring that I used to run on my gravel bike. One of the chainring bolts is rounded so I would need to drill it out. Let me know I can check tonight.
Re: Wtd: 1x crankset
Posted: Mon Jun 16, 2025 5:03 pm
by rivers
Kuman wrote: ↑Mon Jun 16, 2025 9:34 am
Hi I think I still have deore 170mm with Blackspire 36t chainring that I used to run on my gravel bike. One of the chainring bolts is rounded so I would need to drill it out. Let me know I can check tonight.
What type of BB does it need? Conscious my gravel bike is a BB86 press fit.
Re: Wtd: 1x crankset
Posted: Tue Jun 17, 2025 6:46 am
by Kuman
rivers wrote: ↑Mon Jun 16, 2025 5:03 pm
Kuman wrote: ↑Mon Jun 16, 2025 9:34 am
Hi I think I still have deore 170mm with Blackspire 36t chainring that I used to run on my gravel bike. One of the chainring bolts is rounded so I would need to drill it out. Let me know I can check tonight.
What type of BB does it need? Conscious my gravel bike is a BB86 press fit.
It's standard Shimano Hollowtech 2. If BB86 is for GXP cranks it won't work.
Re: Wtd: 1x crankset
Posted: Thu Jun 19, 2025 7:39 pm
by rivers
Kuman wrote: ↑Tue Jun 17, 2025 6:46 am
rivers wrote: ↑Mon Jun 16, 2025 5:03 pm
Kuman wrote: ↑Mon Jun 16, 2025 9:34 am
Hi I think I still have deore 170mm with Blackspire 36t chainring that I used to run on my gravel bike. One of the chainring bolts is rounded so I would need to drill it out. Let me know I can check tonight.
What type of BB does it need? Conscious my gravel bike is a BB86 press fit.
It's standard Shimano Hollowtech 2. If BB86 is for GXP cranks it won't work.
Do you have any photos?
Re: Wtd: 1x crankset
Posted: Fri Jun 20, 2025 7:59 am
by Kuman
I will sort some photos tomorrow. I'm stuck at work all day today.