Page 1 of 1

Wanted forks that take 29x3.0, rigid or sus

Posted: Sat Nov 30, 2024 9:34 am
by riderdown
Building up the olsen as a winter bogtrotter

Suspension around 120mm, rigid suspension corrected to similar

Lock out if suspension

Boost hub

What have you got?

Re: Wanted forks that take 29x3.0, rigid or sus

Posted: Tue Dec 03, 2024 10:24 am
by Amey
Where are you based? if London I have a stache frameset haha

Re: Wanted forks that take 29x3.0, rigid or sus

Posted: Tue Dec 03, 2024 10:54 am
by faustus
Flagrant plug of these forks I can't sell: https://bearbonesbikepacking.co.uk/phpB ... hp?t=24946

They took a 2.6 with plenty of room, but are only 490mm a/c so might not be quite what you're after...Currently £120 but probably open to an offer!

Re: Wanted forks that take 29x3.0, rigid or sus

Posted: Tue Dec 03, 2024 6:14 pm
by riderdown
.They took a 2.6 with plenty of room, but are only 490mm a/c so might not be quite what you're after...Currently £120 but probably open to an offer!
With my heft I don't want to risk the small hole/ damage in the carbon unfortunately

Re: Wanted forks that take 29x3.0, rigid or sus

Posted: Tue Dec 03, 2024 6:52 pm
by faustus
Fair enough, though it's just a surface scrape and I'm no lightweight... understand why the damage is off-putting though

Re: Wanted forks that take 29x3.0, rigid or sus

Posted: Tue Dec 03, 2024 7:32 pm
by slarge
Got some Rockshox Rekons - off a new bike. Boost bolt through, but a short steerer (i think 170mm from memory)

Re: Wanted forks that take 29x3.0, rigid or sus

Posted: Wed Dec 25, 2024 6:58 pm
by riderdown
Still looking, reasonable steerer length needed

Re: Wanted forks that take 29x3.0, rigid or sus

Posted: Sun Dec 29, 2024 9:09 pm
by substandard
Is boost a must have?

Might not be what you’re after


Got an ally version of the exotic fork in uber-duber boost (due out in 2028 hehe) also known as 135x15mm FDS.

Have a hope hub to suit this as well

Re: Wanted forks that take 29x3.0, rigid or sus

Posted: Mon Dec 30, 2024 11:17 am
by riderdown
Is boost a must have?
Yes unfortunately

Re: Wanted forks that take 29x3.0, rigid or sus

Posted: Thu Jan 02, 2025 3:06 pm
by richieblade
I have set of Wren.inverted forks with 110mm travel. Currently on a pinion.bike (see my advert) but may split. No middle arch so a 3 inch tyre should easily fit