*WANTED* Aluminium Riser Bars

Buy, sell, swap.

Moderators: Bearbonesnorm, Taylor, Chew

Post Reply
mfezela

*WANTED* Aluminium Riser Bars

Post by mfezela »

± 720mm wide, ± 30mm rise.

N.B. 25.4mm clamp diameter.

Answer Protaper AM circa 2006 would be absolutely perfect.
redefined_cycles
Posts: 10411
Joined: Tue Sep 20, 2016 8:19 am
Location: Dewsbury, West Yorkshire

Re: *WANTED* Aluminium Riser Bars

Post by redefined_cycles »

Image

Image

Any of these 2 any good to you. The gt is 630mm(ish) and the Amoeba is 780mm(ish)...
mfezela

Re: *WANTED* Aluminium Riser Bars

Post by mfezela »

Yes to the Amoeba :-)
Price? Paypal?
Definitely 25.4mm clamp?

P.M. sent

Regards,

Jan
mfezela

Re: *WANTED* Aluminium Riser Bars

Post by mfezela »

Looking carefully again at that Amoeba it's marked as 650mm not 780mm (ish).
If it is only 650mm, I'm not interested.
Regards,
Jan
redefined_cycles
Posts: 10411
Joined: Tue Sep 20, 2016 8:19 am
Location: Dewsbury, West Yorkshire

Re: *WANTED* Aluminium Riser Bars

Post by redefined_cycles »

mfezela wrote: Fri Jan 03, 2020 7:29 pm Looking carefully again at that Amoeba it's marked as 650mm not 780mm (ish).
If it is only 650mm, I'm not interested.
Regards,
Jan
Let me get the tape measure out again (goes to check)...

Yes... you're right. 683mm. Sorry about that.. from measuring and writing before I obviously lost a fair few mm. Soz.

Anyway, PM replied to :-bd

Thanks... Shafiq
Post Reply