Karrimor explorer sleeping mat with a free mug https://www.flickr.com/photos/93806290@N05/13973683494/

jay91 wrote:Karrimor explorer sleeping mat with a free mug https://www.flickr.com/photos/93806290@N05/13973683494/

And a bit of light reading

Fantasticmrmatt wrote:

jay91 wrote:Karrimor explorer sleeping mat with a free mug https://www.flickr.com/photos/93806290@N05/13973683494/

And a bit of light reading

I'm getting there now

Big bottle cage from SJS


And this little beauty
http://www.backpackinglight.co.uk/shelters-1/WF113.html

And this little beauty
http://www.backpackinglight.co.uk/shelt ... WF113.html

I can do you a lovely pole for that John if you don't have one ... custom carbon is an option

s8tannorm wrote:

And this little beauty
http://www.backpackinglight.co.uk/shelt ... WF113.html

I can do you a lovely pole for that John if you don't have one ... custom carbon is an option

I might just take you up on that, I got their carbon pole and when I have a quick set up in the windy garden this afternoon it bent one hell of a lot.
I'll have a search for how to pitch the tent correctly to stop this happening, if not how rigid is yours?

I might just take you up on that, I got their carbon pole and when I have a quick set up in the windy garden this afternoon it bent one hell of a lot.
I'll have a search for how to pitch the tent correctly to stop this happening, if not how rigid is yours?

The SMD poles do tend to bend a fair amount, the Pole-a-bear 10.5mm alloy poles will bend less and the carbon poles don't bend at all

Is my pole ready then?
You sourced some tips now?

What is the current lead time for Bear Bones poles?

Just awaiting the Eriksen post to pair it with. I hope it's comfy!

Oh that looks right posh but very nice
Let us know how you get on with it

Mart wrote:Oh that looks right posh but very nice
Let us know how you get on with it

Especially as I think it's a Cambium one? (blurry pic )

Is my pole ready then?
You sourced some tips now?

Oops, yeah kinda forgot ... how long was it again 135cm?

What is the current lead time for Bear Bones poles?

Demand sometimes outstrips stocks but it's a continual process, so if there's a delay it's usually no longer than a week. Poles will be available at the start of the WRT on a 'first up, best dressed' basis.

Mart wrote:Oh that looks right posh but very nice
Let us know how you get on with it

i've been a Charge Spoon man up until now, so I hope I don't regret the change!

Part financed by the Tesco/Evans 2x club card points offer.

s8tannorm wrote:

Is my pole ready then?
You sourced some tips now?

Oops, yeah kinda forgot ... how long was it again 135cm?

Don't know. I'll have to check when I get home. Sounds about right though.

Don't know. I'll have to check when I get home. Sounds about right though.

Don't worry, I'll measure mine.

s8tannorm wrote:

Is my pole ready then?
You sourced some tips now?

Oops, yeah kinda forgot ... how long was it again 135cm?

What is the current lead time for Bear Bones poles?

Demand sometimes outstrips stocks but it's a continual process, so if there's a delay it's usually no longer than a week. Poles will be available at the start of the WRT on a 'first up, best dressed' basis.

Arrived today, that was quick

A pair of chain tugs off eBay and a SRAM pc7x chain :D
Finally I can do this single speed malarkey properly! :D

Three Monkii cages from restlessnative of this parish ... thanks fella. Two are going on the carbon Bonty forks from Stu and the third on the underside of the downtube of my Inbred 29er.

Oh and an Exped Schnozzle thing to speed up inflating my Synmat. Works a treat in early testing.

Look what the AJG man delivered today by ScotRoutes, on Flickr

New Chain and Cassette to go with the BB I just had installed by the bike shop. Also 4 packets (appear to have 2 links each) of KMC Quick links.

just got my wildcat gear,tiger and mountain lion, done a dry fit wished i,d ordered them last week as i could have tried them yesterday/today, oh well something to look fwd to, quick delivery

Hummvee light 3/4 shorts (see bargain alert thread) and an SLX 9-speed rear mech to replace the mangled one on the Fargo (after I fell off on arriving at work ). Still waiting on the new hanger.

Thanks johnny have been after a pair of them for a while and at that price i´ve ordered a pair

Pleased to be of service