Exposure cable connector size?

[rufus748]

I'm trying to source female to female connector for my a Revo but it appears to be a non standard size according to my local Maplins. Anybody know what it is? I'd like to run direct to a battery/gps rather than run the lights as well.
Cheers

[Taylor]

http://www.use1.com/exposure-lights/acc ... -connector

[mtbmarkymark]

Hi
It's an unusual size. The plug is 4mm O.D and 1.7mm I.D
I managed to get some female sockets from ebay eventually
you could join a couple up with a bit of cable, heatshrink over the top, hey presto
Regards Mark

[Mart]

I'd like to run direct to a battery/gps rather than run the lights
Cheers

How are you going to convert the dyno ac output to DC input required for the battery or gps?

[Zippy]

Same size connector as a Sony PSP FYI. I know this, coz I wanted a USB cable to charge mine and got one for a Sony PSP coz exposure ones were all out of stock at the time

[rufus748]

Ah, I "assumed" that I could run it out of the piggy back connector into the battery pack in order to charge phone gps etc. Didn't seem to kick out enough power. I guess if I feed it direct from the hub it will be ok?

[johnnystorm]

Ah, I "assumed" that I could run it out of the piggy back connector into the battery pack in order to charge phone gps etc. Didn't seem to kick out enough power. I guess if I feed it direct from the hub it will be ok?

I have twisted together the wires for my lights & Biologic regulator and run them together. Means I can run them at the same time or lights off and just charging and seems to work fine. I'm using a battery as a buffer.