Free - 9 speed bits + more

Buy, sell, swap.

Moderators: Bearbonesnorm, Taylor, Chew

Post Reply
User avatar
PaulE
Posts: 886
Joined: Fri Sep 02, 2016 9:05 am
Location: Sheffield

Free - 9 speed bits + more

Post by PaulE »

Does anyone have a use for some 9 speed cassettes, possibly shifters, chainrings and chains? I was looking for something else and found a few .... Yours for the cost of postage plus a few quid to feed the bear ...


Also found some barely used (maybe only fitted) cyclo-cross cantis, and various well used lo-profile cantis. Again, postage plus a bit of bear food. I suspect there's quite a lot more useless to me, but hopefully helpful to someone else stuff in the garage, so will add to this thread once I extract it from under the assorted crap!
sqibjib
Posts: 427
Joined: Thu Mar 22, 2018 9:39 am

Re: Free - 9 speed bits + more

Post by sqibjib »

Hi Paul

Dibs on the 9 speed stuff.

Let me know and I can make a donation

Cheers Stuart
Life is better on a bike
After work bivi film https://youtu.be/N-xxarJkrpE
User avatar
PaulE
Posts: 886
Joined: Fri Sep 02, 2016 9:05 am
Location: Sheffield

Re: Free - 9 speed bits + more

Post by PaulE »

Excellent. I'll get all the bits together this afternoon and send you a picture to show what there is. Where are you for delivery?
User avatar
PaulE
Posts: 886
Joined: Fri Sep 02, 2016 9:05 am
Location: Sheffield

Re: Free - 9 speed bits + more

Post by PaulE »

sqibjib wrote: Mon Jul 10, 2023 11:48 pm Hi Paul

Dibs on the 9 speed stuff.

Let me know and I can make a donation

Cheers Stuart
I've had a hunt, and theres 2 cassettes, 1 chain and a couple of Tiagra short cage rear mechs (only 1 jockey wheel between them though) if they're any use? Also an XT front mech.
sqibjib
Posts: 427
Joined: Thu Mar 22, 2018 9:39 am

Re: Free - 9 speed bits + more

Post by sqibjib »

Hi Paul

Thanks for the offer but I will leave it, but I will throw a few pounds to the bear for looking for me.

Cheers Stuart
Life is better on a bike
After work bivi film https://youtu.be/N-xxarJkrpE
User avatar
PaulE
Posts: 886
Joined: Fri Sep 02, 2016 9:05 am
Location: Sheffield

Re: Free - 9 speed bits + more

Post by PaulE »

No worries
Post Reply