I've been using a one of my 50" carbon poles from my stratospire 2 for my lunar solo but it bends which suggests to me that it's slightly too long. A quick google suggests 49" would be better.
Any lunar solo users confirm the correct length?
Stu, what would you suggest for a replacement pole?
Poles....
Moderators: Bearbonesnorm, Taylor, Chew
Re: Poles....
I'd see that thanks and was planning on ordering one but want to be more certain of the length etc.
You Tube:
https://www.youtube.com/channel/UCGYaFH ... mTPePCcCXQ
Instagram: https://www.instagram.com/dk.nwhy/
https://www.youtube.com/channel/UCGYaFH ... mTPePCcCXQ
Instagram: https://www.instagram.com/dk.nwhy/
- Bearbonesnorm
- Posts: 24199
- Joined: Sun Jun 05, 2011 8:53 pm
- Location: my own little world
Re: Poles....
Sixmoon design reccommend a 125cm pole, the actual height of a Lunar is slightly less than this, so the extra pole length is what raises the edges off the ground. I'm inclined to go for a 130cm pole as it should make getting a good taught pitch easier on less than ideal (not flat) pitches. If you needed it set lower just scoop out a little hollow for the pole to sit in or off-set the pole slightly.
10.5mm diameter will support a Lunar fine, it may flex a little but it won't bend. I made Mart a custom carbon pole for his Nemo (very similar to a Lunar) but it would be harder for a Lunar due to it requiring a spiked tip.
10.5mm diameter will support a Lunar fine, it may flex a little but it won't bend. I made Mart a custom carbon pole for his Nemo (very similar to a Lunar) but it would be harder for a Lunar due to it requiring a spiked tip.
May the bridges you burn light your way
Re: Poles....
Thanks Stu. The pole(s) I have already are 127cm. Sounds like I'm better sticking with them and digging a hole! 

You Tube:
https://www.youtube.com/channel/UCGYaFH ... mTPePCcCXQ
Instagram: https://www.instagram.com/dk.nwhy/
https://www.youtube.com/channel/UCGYaFH ... mTPePCcCXQ
Instagram: https://www.instagram.com/dk.nwhy/