I dunno - since going singlespeed it has crossed my mind that having some kind of 2 speed high and low range (concealed cunningly in the BB so people don't realise you are a wuss) would actually be very good - will still have a low maintenance drivetrain, no dangly thing and a nice light back end. ...

Received, thanks.

I've received the frame, cheers.

If the frame is still going and you can post it I will take it.

How much to ship a coffee dripper?

PM'd re rack and waist pack.

PMed

Thanks for the reply, I'd be looking for a 29er.

What size is the rim? Is it tubeless?
I could do with a commuting wheel until I sort out my dynamo hub with knackered bearings.

A warning: I used some medium strength threadlock on some chainring bolts (I had the medium strength stuff to hand). When I tried to take them off I discovered that the thread on the bolts is wide - with a large surface area and lots of leverage - and the hex key slot in the middle is small with mu...

A warning: I used some medium strength threadlock on some chainring bolts (I had the medium strength stuff to hand). When I tried to take them off I discovered that the thread on the bolts is wide - with a large surface area and lots of leverage - and the hex key slot in the middle is small with muc...

Thank you for the advice and the GPX everyone.
I'll be setting out in 20 minutes and bringing up the rear on a black gravel bike.
Andy

Ouch. So I assumed from the email that I and others could view the course but no, as K1100T says, Komoot demands money! Sorry, I should have checked.

Now that the course is out I'm looking for some advice. Will trying to do this on a gravel bike kill me?

I'm interested, if you decide against carving the slot open.
How much hove they had? Have you tested the waterproofing?

That plus postage, sure.

In these photos the tyre is 25mm wide, the mudguard is 40mm wide. https://live.staticflickr.com/65535/50516358418_22b9a94ef8_c_d.jpg https://live.staticflickr.com/65535/50517243427_e84d51850f_c_d.jpg I can experiment with wider tyres Saturday morning. The brakes are still on the bike. The mudguards ...

I don't know if this will be of interest to anyone here. Dawes Audax Supreme, 631 steel, rim brakes. I'm not sure what the official size is but the seat tube is ~ 57cm and the top tube ~ 58cm. It would be easiest to post the frame and fork (including headset, seatclamp and HT II BB). I've already ro...

Two TRP Spyre brake callipers. I've written off two sets of new brake pads with mineral oil contamination in the last fortnight and I'm giving up.

Several bits of strap wear / tape lift-off, I've tried to photograph the worst (see the album link). I bought this second hand, I think it's the 2018 model. Pics: https://live.staticflickr.com/65535/50514434202_a62b1c8cd3_k_d.jpg https://www.flickr.com/photos/190750559@N06/shares/2486he I paid £280 ...

PM'd

Received, thank you. It's very yellow
I've looked at the other threads and Escape Goat seems to have set a new record for sellers remorse?

PM'd you.

I hope that this is a rebadge of the 15mm axle version of the Shutter Precision hub. My QR Exposure hub certainly was ... knowing so came in handy after it self destructed after 500 miles and Exposure wanted nowt to do with it. SP were very good though. I'm not sure how encouraged I should be by th...

I think this is decent deal but could be wrong. CRC are selling off Exposure dynamo hubs in QR15 form for £90 (with code). I hope that this is a rebadge of the 15mm axle version of the Shutter Precision hub.

https://www.chainreactioncycles.com/exp ... prod173650